Jump to content
主视角中国

COD相关软件下载(必读)


=UN=PK3

Recommended Posts

ftp下载COD2

BT下载

http://www.fpschina.com/index.php?showtopic=6497

http://bbs.cga.com.cn/BBS_content/40/2006/...283讯雷下载

ftp://218.28.23.195/cod2.rar

http://www.xgdown.com/soft/24823.htm 讯雷下载

语音通讯软件TS下载地址:

TS下载地址 http://www.gametalk.cn/gametalk/down.html

选择网通或电信下载

TS使用方法

1下好客户端后点连接然后点快速连接

2输入IP:222.243.203.198 呢称就是你的战队ID 然后连接

3选择设置/音频输入设置/ 点按键发送语音/点设置 然后按任意键,测试编码为16。4 现在把对话框关闭就OK了。

注意设置按键发送语音后说话的时候要按住设置的按键!:)

TS使用详细说明: http://www.tts8.com/ts/ts-readme.htm

Internet服务器搜索工具(简称ASE)

The All-Seeing Eye V2.3.6 简体中文正式版 (FPSCHINA制作)

安装后请将自动升级关闭,升级时只升级规则即可.

群共享里下载

ase官方下载地址:

http://videogames.yahoo.com/multiplayer

COD2相关优化

在cod中把 X:\Call of Duty\Main下的config_mp文件用写字板打开加入:

bind , "cg_drawFPS 1"

bind / "cg_drawFPS 0"

用逗号键显示FPS(祯数)

用/号键关闭

bind F6 "name ^2=UN=^1yrx"

bind F7 "name ^2=UN=^1yrxCHINA"

(F6和F7是换你的名字)

bind KP_MINUS "stoprecord"

bind KP_PLUS "record"

bind com_maxfps 125

bind r_picmip 4

bind r_picmip2 4

bind rate 25000

bind , "cg_drawFPS 1"

bind / "cg_drawFPS 0"

用逗号键显示FPS(祯数)

用/号键关闭

bind KP_MINUS "stoprecord"

bind KP_PLUS "record"

用小键盘加号键开始游戏录像

用小键盘减号键停止

录像将存放在(安装目录\main\domes目录)

慎重使用单机录像功能-----太不完善,录几分钟就几十兆,好在压缩后就一两兆!联网的相当完善,可放心使用。

观看录像-进入游戏主选单--游戏时不可按~键调出控制模式输入demo 录像名 比如 demo demo0000 不用带后缀

cfg中加入一键换ID的设置如下:

在cod中把 X:\Call of Duty\Main下的config_mp文件用写字板打开加入:

bind F6 "name ^2=UN=^1PK3"

bind F7 "name ^2=UN=^1PK3CHINA"

这样按F6或F7就是自己的ID了

/exec autoexec.cfg

map mp_breakout

map mp_brecourt

map mp_burgundy

map mp_carentan

map mp_dawnville

map mp_decoy

map mp_downtown

map mp_farmhouse

map mp_leningrad

map mp_matmata

map mp_railyard

map mp_toujane

map mp_trainstation"

Edited by =UN=PK3
Link to comment
Share on other sites

如何输入彩色ID

先按SHIFT+6,出现^符号后,按数字键1-7输入颜色,想换颜色时再按一次SHIFT+6,然后重复上面的步骤就可以了

如何设置名字的颜色?

^1 = 红

^2 = 绿

^3 = 黄

^4 = 蓝

^5 = 淡蓝

^6 = 淡紫

^7 = 白

^8 = 灰

^9 = 黑

我们的输入方式是:^2=UN=^1*** ***为你的名字

FPS的显示:多人游戏中按~打开控制台,输入/cg_drawfps 1 (默认为:0)

锁定FPS的祯数:多人游戏中按~打开控制台,输入/com_maxfps 125 (125为推荐值)

如何录制demo

seta demo_start "record; set demo_tog vstr demo_stop"

seta demo_stop "stoprecord; set demo_tog vstr demo_start"

seta demo_tog "vstr demo_start"

bind F5 "vstr demo_tog"

按F5开始录像再按一下停止录像

在你的cod2安装目录的main/demos/下可以找到.dm_2文件

这就是你录制的demo

如何优化你的cod

1.如何测试你的cod fps

1.1进入多人游戏模式,按"~"调出控制台

1.2键入"\timedemo 1" 激活timedemo 命令

1.3键入"\demo timedemo1"用默认的demo来测试fps

1.4等demo运行完,再按"~"进入控制台可以查看frames,time,平均fps

8b63c5ebc87a3abd0e554635fb8845d3.jpg

1 先点最上面的第3项(工具)然后选择最下面的选项

24df6156fbb4acbbad318c256c8469fe.jpg

在2中找到COD2游戏名

82f7ee378f878d9b2180e0a9dd168407.jpg

点3找到COD2游戏,然后确定(在0中可以输入自己的名字)

f4740fa484813d647527f506ca375ebd.jpg

点1后选择2刷新服务器列表,就可以了,点圈3显示国家

dcb0fdae5bd73b3b04bdd2eb8a4a6c5c.jpg

在圈内打勾,亚洲。

TS使用方法

先点连接然后右键点下面的连接 添加新服务器

7e6a218f4242aa4991f2ee55a6814aef.jpg

填入服务器地址和呢称(如果注册过选已注册然后填入用户名和密码)

0cccc97801ea209321b4471dfdecfc4c.jpg

Edited by =UN=PK3
Link to comment
Share on other sites

COD服务器Rcon控制命令

投雷训练时手雷999枚命令

用 powerserver 这个mod,把手雷数量改为999枚。

login <xxxx> OP登录到服务器 xxxx 为服务器的OP密码

map <xxxx> 更换地图 xxxx 为地图名称

devmap <xxxx> 换图并开启作弊模式 xxxx 为地图名称

map_restart 重新载入地图  

fast_restart 快速重启地图  

g_password xxxxx 设置服务器密码 xxxx 为密码,密码为空时取消当前密码

g_allowvote <1/0> 开/关服务器投票 1为开,0为关

g_gametype <sd/tdm/dm/ctf> 设置对战模式  

pam_mode <pub/cb/cal> 设置SD比赛模式 pub为混战模式,此指令仅在SD模式下有效

scr_teambalance <1/0> 设置服务器自动平衡模式 1开启,0关闭

scr_drawfriend <1/0> 设置服务器显示队友标志 1开启,0关闭

scr_friendlyfire <1/0> 设置队友伤害 1开启,0关闭

kick <ID> 踢人 ID为玩家在服务器中的ID

banuser <ID> ban(禁止玩家进入服务器) ID为玩家在服务器中的ID

status 服务器状况列表  

clientkick <n> 用列表序号踢人 n列表中的slot序号

banClient <n> 禁止玩家连接ban n列表中的slot序号

scr_allow_shotgun <0/1> 禁止、允许shotgun 1允许,0禁止

set scr_allow_smokegrenades <0/1> 禁止、允许烟雾弹 1允许,0禁止

注:

  1、以上所有指令在游戏中必需在指令前加上前导标志:“/rcon”,在all seeing eye或者HLSW中不能加前导标志;

  2、在游戏中使用OP权限,必需首先输入:“/rcon login <xxxx>”否则无效。

  3、列表中的尖括号是提示大家必需跟随变量,指令中没有<>。

/cmdlist 命令列表

/rconpassword "密码" 登入

/rcon status 查看状态 =>得到ID号

/rcon clientkick +ID号

/rcon map_restart 重起地图

/rcon map mp_地图名 换地图

例如/rcon map mp_ship

COD 控制台 列表

控制台 命令 以 "/"开头

cmdlist 查看 所有 控制台列表

set sv_gamespy "0" 让服务器 可以被 搜索到

set g_teamkillkick "3" 当FF on时 杀死队友3个人 自动踢出服务器

set g_teamswitchdelay "10" 开局后 可以选择队伍 的时间限制

set rconPassword xxxxx 当你取得控制权后 可以修改 rcon密码 xxxx就是 修改的密码

set g_gametype "tdm" 游戏模式 有 bel, dm, re, sd, tdm 这几种选择

set sv_maxclients "24" 设置 服务器最大 游戏人数

set net_port 28960 port to listen on 设置 游戏外出端口 28960 就是端口

set scr_tdm_scorelimit "100" 设置 TDM模式 当 某方杀人数达到 100后 自动换地图 建议设置 越大越好

set scr_tdm_timelimit "10" 设置TDM模式 换地图 时间

set sv_mapRotation "gametype tdm map mp_dawnville map mp_railyard map mp_rocket map mp_pavlov map mp_carentan map mp_depot map mp_powcamp map mp_ship" 地图 循环 设置

如果设置成OBJ 就把 gametype改成 gametype sd map

set scr_friendlyfire "0" 队友 误伤 设置 0是关闭 1 是开启 2是反馈伤害到自己身上

以SD模式为例 //代表该行为注释 ,

------------------------------------------------------------------------------

// Beginning of code

set dedicated 2

// INTERNET 模式 0 → Dedicated No 1 → LAN

set sv_pure 1

// 不匹配服务器文件的玩家拒绝进入,防作弊

set sv_gamespy "1"

// 让GAMESPY被搜索到

set sv_floodprotect "1"

// 启用玩家发言过载保护

// set g_forceteamspectate "0"

// 0 KILL CAM 模式 1 队友观察模式

// set g_teamkillwarn "3"

// 团队伤害3次警告

// set g_teamkillkick "3"

// 团队伤害3次踢出

//set g_teamswitchdelay "10"

// 切换队伍延时10秒

seta sv_hostname "CoD ^9NoKey ^7SD Server ^4Jazz^7【^9Callofduty.Vicp.Net^7】"

// 服务器名称,^9表示在后面字符为红色

set g_banIPs ""

// 封IP列表

set g_password ""

// 服务器玩家加入密码

set rconPassword "111111"

// 服务器控制密码

set g_log "games_mp.log"

// 将控制台显示的所有显示写入指定LOG文件

set scr_motd " ^2un.fpschina.com ^2=UN=^1PK3^5QQ^455285252

// 屏幕显示的自定义字符

set g_gametype "sd"

// 游戏模式 bel, dm, re, sd, tdm

set net_ip JZP.VICP.NET

// 设定服务器IP

set net_port 28960

// 服务器加入的端口

set sv_maxclients "24"

// 最大玩家数,推荐不要超32人

// set sv_privatepassword "password"

// 允许私有客户加入的密码

// set sv_privateclients "3"

// 允许多少持有的私有密码客户加入

// General Game Default De<I>script</I>ion

//0 - disable weapon 1 - enable weapon

//允许服务器使用的各种武器

set scr_allow_bar "1"

set scr_allow_bren "1"

set scr_allow_enfield "1"

set scr_allow_fg42 "1"

set scr_allow_kar98k "1"

set scr_allow_kar98ksniper "1"

set scr_allow_m1carbine "1"

set scr_allow_m1garand "1"

set scr_allow_mp40 "1"

set scr_allow_mp44 "1"

set scr_allow_nagant "1"

set scr_allow_nagantsniper "1"

set scr_allow_panzerfaust "1"

set scr_allow_ppsh "1"

set scr_allow_springfield "1"

set scr_allow_sten "1"

set scr_allow_thompson "1"

set scr_allow_vote "1"

// 允许玩家投票,当你设定好固定循环服务器,可以屏蔽某些不希望开放的项目,如游戏模式等

set scr_drawfriend "1"

// 队友显示为打开

// Auto Team Balance 团队均衡

set scr_teambalance "0"

set scr_friendlyfire "0"

// 队友伤害 0 →屏蔽 1 →打开 2 →反伤害

seta sv_mapRotation "gametype sd map mp_dawnville map mp_railyard map mp_rocket map mp_pavlov map mp_carentan map mp_depot map mp_powcamp map mp_harbor map mp_hurtgen "

// 地图循环列表,sd模式不支持mp_ship or mp_chateau 并且人数不要大于32

mp_hurtgen

// 启始地图

// end of code

/cg_darwid 0

Edited by =UN=PK3
Link to comment
Share on other sites

服务器命令

N卡调节软件 NvCoolFX2.2

PHP代码:

// generated by Call of Duty, do not modify

unbindall

// Movements

bind W "+forward" // 前进

bind S "+back" // 后退

bind A "+moveleft" // 左平移

bind D "+moveright" // 右平移

bind E "+leanright" // 右侧身

bind Q "+leanleft" // 左侧身

bind C "gocrouch" // 蹲伏

bind CTRL "goprone" // 卧倒

bind PAUSE "toggle cl_paused" // 跳跃

// Actions

bind MOUSE1 "+attack" // 攻击

bind MOUSE2 "toggle cl_run" // 精确攻击

bind F "+activate" // 拆弹,埋弹,上坦克,吉普,等功能键

bind G "mp_quickmap" // 开启地图简略

bind M "weapalt" // 单发/连发切换(只对某些武器有效)

bind R "+reload" // 上子弹

bind T "messagemode" // 所有人文字交流

bind Y "messagemode2" // 队内文字交流

bind V "mp_QuickMessage" // 游戏语音

bind ` "toggleconsole" // 控制台

bind TAB "+scores" // 显示得分

bind ESCAPE "togglemenu" // 主菜单

//Weapon Bindings

bind 1 "weaponslot primary" // 第一枪械

bind 2 "weaponslot primaryb" // 第二枪械

bind 3 "weaponslot pistol" // 手枪

bind 4 "weaponslot grenade" // 手榴弹

bind 5 "weaponslot smokegrenade" // 烟雾弹

bind 6 "weaponslot satchel" // 炸药包

bind 7 "weaponslot binocular" // 望远镜

// Battle Actions

bind F1 "vote yes" // 赞成

bind F2 "vote no" // 反对

bind F4 "+scores" // 显示得分

bind F12 "screenshotJPEG" // 抓图

bind MWHEELDOWN "weapnext" // 滚轮向下:下一个武器

bind MWHEELUP "weapprev" // 滚轮向上:上一个武器

// CG

seta cg_blood "1" // 显示血腥度 (1是0否)

seta cg_brass "0" // 显示弹壳 (1是0否)

seta cg_chatHeight "8" // 显示字体的大小

seta cg_chatTime "12000" // 显示字体的停留时间

seta cg_crosshairAlpha "1.0" //

seta cg_crosshairAlphaMin "0.7" //

seta cg_crosshairDynamic "0" //

seta cg_crosshairNoGun "gfx/reticle/hud@center_ads.tga" //

seta cg_crosshairSize "48" //

seta cg_currentSelectedPlayer "0" // 显示当前选择玩家

seta cg_currentSelectedPlayerName "" // 显示当前选择玩家姓名

seta cg_cursorHints "4" // 提示信息字体大小

seta cg_deadbodyque "32" // 尸体停留时间

seta cg_descriptiveText "1" // 显示描述正文(1是0否)

seta cg_drawCompass "1" // 显示罗盘 (1是0否)

seta cg_drawCrosshair "1" // 显示瞄准器(1是0否)

seta cg_drawCrosshairNames "1" // 显示所瞄准玩家的姓名 (1是0否)

seta cg_drawCrosshairPickups "1" // 显示瞄准器十字准星 ???

seta cg_drawfps "1" // 显示即时帧数(1是0否)

seta cg_drawGun "1" // 显示枪 (1是0否)

seta cg_drawNotifyText "1" // 显示通告正文(1是0否)

seta cg_drawRewards "1" //

seta cg_drawSnapshot "0" //

seta cg_drawStatus "1" //

seta cg_drawTeamOverlay "2" //

seta cg_fov "80" // 显示视角

seta cg_gameBoldMessageWidth "60" //

seta cg_gameMessageWidth "70" //

seta cg_hintFadeTime "100" // 提示信息的淡出时间

seta cg_hudAlpha "1.0" //

seta cg_hudcompassMaxRange "1024" // 罗盘最大范围

seta cg_hudCompassMinRadius "0" // 罗盘最小半径 ???

seta cg_hudCompassMinRange "0" // 罗盘最小范围

seta cg_hudCompassSize "1.0" // 罗盘显示信息的字体大小

seta cg_hudCompassSpringyPointers "0" //

seta cg_hudDamageIconHeight "64" //

seta cg_hudDamageIconInScope "0" //

seta cg_hudDamageIconOffset "32" //

seta cg_hudDamageIconTime "2000" //

seta cg_hudDamageIconWidth "128" //

seta cg_hudObjectiveMaxHeight "70" //

seta cg_hudObjectiveMaxRange "2048" //

seta cg_hudObjectiveMinAlpha "1" //

seta cg_hudObjectiveMinHeight "-70" //

seta cg_hudStanceHintPrints "0" //

seta cg_lagometer "0" // 显示网络延迟

seta cg_marks "1" // 是否显示墙上弹痕

seta cg_noTaunt "0" //

seta cg_noVoiceChats "0" //

seta cg_noVoiceText "0" //

seta cg_predictItems "1" //

seta cg_railTrailTime "400" //

seta cg_scoreboardScrollStep "3" //

seta cg_selectedPlayer "0" //

seta cg_shadows "0" // 显示自身阴影 (1是0否)

seta cg_stereoSeparation "0.4" //

seta cg_subtitleMinTime "3" //

seta cg_subtitles "1" //

seta cg_subtitleWidth "80" //

seta cg_teamChatsOnly "0" //

seta cg_vehicletrails "1" //

seta cg_viewsize "100" //

seta cg_voiceSpriteTime "6000" //

seta cg_weaponCycleDelay "0" //

//CL

seta cl_allowDownload "1" //是否允许客户端下载服务器文件(建议打开)

seta cl_anonymous "0"

seta cl_autocmd "1"

seta cl_freelook "1"

seta cl_goStandJumpTime "0"

seta cl_language "0"

seta cl_maxpackets "30"

seta cl_maxPing "800"

seta cl_mouseAccel "0" //设置鼠标加速度

seta cl_packetdup "1"

seta cl_pitchspeed "140"

seta cl_punkbuster "0" //是否打开pb(防作弊器)有些server需要开启

seta cl_wwwDownload "1"

seta cl_xmodelcheck "0"

seta cl_yawspeed "140"

seta cm_playerCurveClip "1"

//COM - Common

seta com_hunkmegs "128"

seta com_introplayed "1"

seta com_maxfps "125" //设置游戏中可以达到的最大fps,数值越高越流畅

seta com_recommendedSet "1"

seta con_debug "0"

seta con_minicon "0"

seta con_miniconlines "5"

seta con_minicontime "4"

//

seta fx_cullbias "0"

seta fx_cullscale "1"

//G-game

seta g_allowvote "1"

seta g_allowVoteClientKick "0"

seta g_allowVoteGameType "1"

seta g_allowVoteKick "0"

seta g_allowVoteMap "1"

seta g_allowVoteMapRestart "1"

seta g_allowVoteMapRotate "1"

seta g_allowVoteTempBanClient "0"

seta g_allowVoteTempBanUser "0"

seta g_allowVoteTypeMap "1"

seta g_banIPs ""

seta g_complaintlimit "3"

seta g_log "games_mp.log"

seta g_logSync "0"

seta g_tracerchance "0.4"

seta g_useGear "1"

seta g_vehicleHorns "1"

seta g_voiceChatsAllowed "4"

seta handicap "100"

seta head ""

// IN - Input???

seta in_joyBallScale "0.02"

seta in_joystick "0"

seta in_midi "0"

seta in_midichannel "1"

seta in_mididevice "0"

seta in_midiport "1"

seta in_mouse "1"

seta joy_threshold "0.15"

// M - Mouse

seta m_filter "0"

seta m_forward "0.25"

seta m_pitch "0.022"

seta m_side "0.25"

seta m_yaw "0.022"

//MSS

seta model ""

seta mss_3d_provider "Miles Fast 2D Positional Audio"

seta mss_bits "16"

seta mss_errorOnMissing "1"

seta mss_khz "44"

seta mss_stereo "1"

seta mss_volume "0.8"

seta name "Unknown Soldier"

// NET - NET

seta net_noipx "0"

seta net_noudp "0"

seta net_socksEnabled "0"

seta net_socksPassword ""

seta net_socksPort "1080"

seta net_socksServer ""

seta net_socksUsername ""

// R - Render

seta r_ati_fsaa_samples "1"

seta r_ati_pntriangles "0"

seta r_ati_truform_normalmode "QUADRATIC"

seta r_ati_truform_pointmode "CUBIC"

seta r_ati_truform_tess "1"

seta r_colorbits "32"

seta r_customaspect "1"

seta r_customheight "1024"

seta r_customwidth "1600"

seta r_depthbits "0"

seta r_detailtextures "1"

seta r_diffuseSunQuality "2"

seta r_diffuseSunSteps "3"

seta r_dlightQuality "0" // 光源质量 (1高/0低)

seta r_drawSun "0" // 是否显示太阳(有些地图太阳晃眼,建议关掉)

seta r_dynamiclight "1"

seta r_entLightCutoff "0.2"

seta r_ext_texture_filter_anisotropic "0"

seta r_finish "0"

seta r_fullscreen "1" //是否全屏显示

seta r_gamma "1.0" //显示游戏里的亮度

seta r_ignoreGLErrors "1"

seta r_ignorehwgamma "0"

seta r_inGameVideo "1"

seta r_lastValidRenderer "GeForce4 MX 440 with AGP8X/AGP/SSE2"

seta r_lodbias "0" // 模型质量

seta r_lodscale "1" // 模型质量

seta r_maxEntLights "8"

seta r_mem_agp "10"

seta r_mem_backend "1"

seta r_mem_manual "0"

seta r_mem_video "0"

seta r_minEntLightIntensity "0.02"

seta r_mode "4"

seta r_nv_fog_dist "1" //nvida雾化效果,建议关闭

seta r_nv_fogdist_mode "GL_EYE_RADIAL_NV"

seta r_overBrightBits "1"

seta r_picmip "2" //数值越高,画面越模糊,最大值为4

seta r_picmip2 "2" //数值越高,画面越模糊,最大值为4

seta r_portalbevels "0.7"

seta r_primitives "0"

seta r_railCoreWidth "1"

seta r_railSegmentLength "32"

seta r_railWidth "16"

seta r_simpleMipMaps "1"

seta r_skip_auto_config "0"

seta r_stencilbits "8"

seta r_swapDelay "0"

seta r_swapInterval "0"

seta r_texturebits "0"

seta r_textureMode "GL_LINEAR_MIPMAP_NEAREST"

seta r_vbo_interleave "0"

seta r_vbo_paranoia "1"

seta r_vbo_smc_static_draw "1"

seta r_vbo_stream_draw "1"

seta rate "5000"

seta sensitivity "5"

seta server1 ""

seta server10 ""

seta server11 ""

seta server12 ""

seta server13 ""

seta server14 ""

seta server15 ""

seta server16 ""

seta server2 ""

seta server3 ""

seta server4 ""

seta server5 ""

seta server6 ""

seta server7 ""

seta server8 ""

seta server9 ""

seta snaps "20"

//SV

seta sv_allowDownload "1"

seta sv_floodProtect "1"

seta sv_hostname "CoDHost"

seta sv_maxclients "20"

seta sv_maxPing "0"

seta sv_maxRate "0"

seta sv_minPing "0"

seta sv_punkbuster "0"

seta sv_wwwBaseURL ""

seta sv_wwwDlDisconnected "0"

seta sv_wwwDownload "0"

seta sys_configSum "196735356"

seta sys_cpuMHz "2411.58"

seta sys_sysMB "1024"

seta sys_vidMB "64"

// UI - User Interface

seta ui_bigFont "0.4"

seta ui_browserFriendlyfire "-1"

seta ui_browserGameType "0"

seta ui_browserKillcam "-1"

seta ui_browserMaster "0"

seta ui_browserMod "-1"

seta ui_browserShowDedicated "0"

seta ui_browserShowEmpty "1"

seta ui_browserShowFull "1"

seta ui_browserShowNoPassword "1"

seta ui_browserShowPassword "1"

seta ui_browserShowPunkBuster "-1"

seta ui_browserShowPure "1"

seta ui_browserSortKey "4"

seta ui_currentMap "0"

seta ui_currentNetMap "0"

seta ui_dedicated "0"

seta ui_extraBigFont "0.55"

seta ui_gametype "3"

seta ui_joinGametype "0"

seta ui_mapIndex "0"

seta ui_netGametype "5"

seta ui_netGametypeName "dm"

seta ui_netSource "0"

seta ui_serverStatusTimeOut "7000"

seta ui_smallFont "0.25"

// 窗口模式下在屏幕上的位置(单位:象素)

seta vid_xpos "3" // 与屏幕左边的距离

seta vid_ypos "22" // 与屏幕上边的距离

seta win_allowalttab "0"

Link to comment
Share on other sites

  • 1 month later...

cod参数帖

UO KEY:BZTZ-UWG7-UNTN-J7RN-BDE5

COD KEY:28PP-28GH-PEKU-UK22-AD53 GGY8-YGYT-X42D-T2GY-A43A

录制DEMO设置:// demo record toggle

seta demo_start "record; set demo_tog vstr demo_stop"

seta demo_stop "stoprecord; set demo_tog vstr demo_start"

seta demo_tog "vstr demo_start"

bind F5 "vstr demo_tog"

其中F5表示:按一下F5就开始录DEMO,在按一下就停止录DEMO

天旋地转脚本:

bind x "vstr dance;say ^1Wa^3ha^9ha..."

seta dance "vstr dance_1;wait;wait;wait;vstr dance_2;wait;wait;wait;vstr dance_3;wait wait wait;centerview"

seta dance_1 "cl_pitchspeed 500;cl_yawspeed 2000;+movedown;+left;wait 27;+button3"

seta dance_2 "+lookdown;wait 120;-button3;centerview;-lookdown;+lookup;wait 120"

seta dance_3 "-lookup;-movedown;-left;wait 15;cl_pitchspeed 140;cl_yawspeed 140;centerview"

其中X的意思是:按一下X就会原地转圈(不要按多啦!会晕的)

鼠标参数:

呼出控制台后按sens+TAB会有sensitivity 直接输入数字就是鼠标数度!我的是5

呼出控制台后按cl_mouse+TAB会有cl_mouseAccel直接输入数字就是鼠标加数度!我的是0.5

FPS的显示:cg_drawfps 1 (默认为:0)

锁定FPS的祯数:com_maxfps 125 (125是推荐值,默认的为85)

在游戏中显示网络状况的参数:seta cg_lagometer 1 (默认的为:0)

cfg中加入一键换ID的设置如下:

在cod中把 X:\Call of Duty\Main下的config_mp文件用写字板打开加入:

bind F6 "name ^1z^3E^1aL^7|^3XXX^1[CCL]"

bind F7 "name ^1z^3E^1aL^7|^3XXX^1[China]"

在UO中把 X:\Call of Duty\uo下的uoconfig_mp文件用写字板打开加入:

bind F6 "name ^1z^3E^1aL^7|^3XXX^1[CCL]"

bind F7 "name ^1z^3E^1aL^7|^3XXX^1[China]"

新队员在那两个文件中加入:bind F6 "name ^1z^3E^1aL^7|^3XXX^1[New]"

这样在游戏中直接按F6或F7就是自己的名字啦!

以上转自zEaL战队BBS(http://zeal.oicp.net/bbs)作者:COD UO ID:zEaL|Niao

原文:http://zeal.oicp.net/bbs/showthread.php?t=272

Link to comment
Share on other sites

  • 3 months later...
  • 3 months later...
  • 2 weeks later...

服务器建立方法

在 main 里面建立一个文件夹 players,在 players 里面建立一个文本文件 active.txt ,在 active.txt 里面输入 ABCD ,然后保存关闭。接着还是在 players 里面建立一个文件夹 ABCD,在里面建立一个 config_mp.cfg 文件,内容如下,最好能按照服务器的情况调整一下:

代码

// generated by Call of Duty, do not modify

unbindall

unbindall

bind TAB "+scores"

bind ESCAPE "togglemenu"

bind SPACE "+gostand"

bind 1 "weapnext"

bind 2 "weapnext"

bind 4 "+smoke"

bind ` "toggleconsole"

bind A "+moveleft"

bind B "+binoculars"

bind C "gocrouch"

bind D "+moveright"

bind E "+leanright"

bind F "+activate"

bind G "+frag"

bind Q "+leanleft"

bind R "+reload"

bind S "+back"

bind T "chatmodepublic"

bind V "mp_QuickMessage"

bind W "+forward"

bind X "openscriptmenu ingame changeweapon"

bind Y "chatmodeteam"

bind Z "+talk"

bind ~ "toggleconsole"

bind PAUSE "toggle cl_paused"

bind CTRL "goprone"

bind SHIFT "+melee_breath"

bind F1 "vote yes"

bind F2 "vote no"

bind F4 "+scores"

bind F12 "screenshotJPEG"

bind MOUSE1 "+attack"

bind MOUSE2 "toggleads"

bind MOUSE3 "+frag"

seta ai_corpseCount "10"

seta cg_brass "1"

seta cg_marks "1"

seta com_hunkMegs "160"

seta com_introPlayed "0"

seta com_maxfps "85"

seta com_recommendedSet "1"

seta fx_sort "1"

seta g_antilag "1"

seta g_banIPs ""

seta g_clonePlayerMaxVelocity "80"

seta g_deadChat "0"

seta g_dropForwardSpeed "10"

seta g_dropUpSpeedBase "10"

seta g_dropUpSpeedRand "5"

seta g_log "Server1_mp.log"

seta g_logSync "1"

seta g_oldVoting "1"

seta g_playerCollisionEjectSpeed "25"

seta g_useGear "1"

seta g_useholdspawndelay "1"

seta g_voiceChatTalkingDuration "500"

seta g_voteAbstainWeight "0.5"

seta in_mouse "1"

seta loc_forceEnglish "0"

seta loc_language "0"

seta mss_khz "44"

seta net_noipx "0"

seta net_noudp "0"

seta net_socksEnabled "0"

seta net_socksPassword ""

seta net_socksPort "1080"

seta net_socksServer ""

seta net_socksUsername ""

seta r_aaSamples "2"

seta r_depthPrepassModels "0"

seta r_distortion "0"

seta r_dlightLimit "4"

seta r_glow "0"

seta r_lodscale "1"

seta r_mode "640x480"

seta r_rendererPreference "none"

seta r_zfeather "0"

seta sc_enable "0"

seta sv_allowAnonymous "0"

seta sv_allowDownload "1"

seta sv_floodProtect "1"

seta sv_hostname "ABCD"

seta sv_maxclients "36"

seta sv_maxPing "220"

seta sv_maxRate "20000"

seta sv_minPing "0"

seta sv_reconnectlimit "3"

seta sv_voice "0"

seta sys_configSum "128026549"

seta sys_cpuGHz "2.61339"

seta sys_gpu ""

seta sys_sysMB "1024"

seta voice_deadChat "0"

seta voice_global "0"

seta voice_localEcho "0"

然后在 main 里面建立一个 server.txt 的文本文件,内容如下,可以自行修改需要的参数:

代码

/ THIS IS CTF CONFIG

// ************************************************** ***

// *********** Server Security & Errors ****************

// ************************************************** ***

//Passwords

set rcon_password "" //CHANGE ME

set sv_privatePassword "" // OPTIONAL CHANGE ME

set g_password "" // Only used if you want to close your server to the public

//Logging

set g_log "Server1_mp.log"

set g_logSync "1"

//SV Pure

set sv_pure "1"

//SV Cheats

set sv_cheats "0"

//Allowed Clans

set sv_allowedClan1 ""

set sv_allowedClan2 ""

//Disable Console

set sv_disableClientConsole "0"

set sv_reconnectlimit "3"

// ************************************************** ***

// *********** Server Personality Dvars ****************

// ************************************************** ***

// Hostname and MOTD

sv_hostname "ABCD"

set scr_motd ""

// Max Players and Saved Private Possitions

set sv_maxclients "32" //Maximum players on the server who are not using the private password

set sv_privateClients "4" //Allows players to enter the server without taking up public slots

//Downloads

seta sv_allowAnonymous "0"

set sv_allowdownload "1"

// Server Packet Rate

set sv_maxRate "20000"

// Limit Laggers and reconnect spammers

set sv_reconnectlimit "3" // Limits how long a player must wait to reconnect to a server

set sv_minPing "0"

set sv_maxPing "220"

// - Banning

set g_banIPs ""

// AntiFlooding Settings

set sv_floodProtect "1"

// ************************************************** ***

// ******************** Voice *************************

// ************************************************** ***

set sv_voice "0"

set sv_voiceQuality "1"

// ************************************************** ***

// ******************** Map Rotation *******************

// ************************************************** ***

// Do NOT put your map_rotate command here! Map_rotate should be called VERY last

// Set the Gametype

set g_gametype "ctf"

// Set the Map Rotation

set sv_MapRotation "gametype ctf map mp_breakout gametype ctf map mp_brecourt gametype ctf map mp_burgundy gametype ctf map mp_carentan gametype ctf map mp_dawnville gametype ctf map mp_decoy gametype ctf map mp_downtown gametype ctf map mp_farmhouse gametype ctf map mp_leningrad gametype ctf map mp_matmata gametype ctf map mp_railyard gametype ctf map mp_toujane gametype ctf map mp_trainstation"

set sv_maprotationcurrent ""

// ************************************************** ***

// *************** Match Setup Options *****************

// ************************************************** ***

// Use these to set how your server will play a map.

// CTF

set scr_ctf_scorelimit "5"

set scr_ctf_timelimit "30"

// S&D

//set scr_sd_bombtimer "60"

//set scr_sd_graceperiod "15"

//set scr_sd_roundlength "4"

//set scr_sd_roundlimit "0"

//set scr_sd_scorelimit "10"

//set scr_sd_timelimit "0"

// TDM

//set scr_tdm_scorelimit "300"

//set scr_tdm_timelimit "30"

// DM

//set scr_dm_scorelimit "50"

//set scr_dm_timelimit "30"

// HQ

//set scr_hq_scorelimit "600"

//set scr_hq_timelimit "30"

// ************************************************** ***

// ***************** Gameplay Dvars ********************

// ************************************************** ***

// Team Icons

set scr_drawfriend "1"

// Friendly Fire

set scr_friendlyfire "0"

// Kill Cam & Spectate

set scr_killcam "0"

set scr_spectatefree "0"

set scr_spectateenemy "0"

// Auto Team Balance

set scr_teambalance "1"

// Force Respawn

set scr_forcerespawn "1"

// ************************************************

// ******************* Voting *********************

// ************************************************

set g_allowvote "0"

// ************************************************** ***

// ************ Weapon Settings ************************

// ************************************************** ***

// Weapon Ammo Pools

set g_weaponAmmoPools "0"

//Snipers

set scr_allow_enfieldsniper "1"

set scr_allow_kar98ksniper "1"

set scr_allow_nagantsniper "1"

set scr_allow_springfield "1"

set scr_allow_svt40 "1"

// Rifles

set scr_allow_enfield "1"

set scr_allow_kar98k "1"

set scr_allow_m1carbine "1"

set scr_allow_m1garand "1"

set scr_allow_nagant "1"

set scr_allow_g43 "1"

// MGs

set scr_allow_bar "1"

set scr_allow_bren "1"

set scr_allow_mp44 "1"

set scr_allow_ppsh "1"

//SMGs

set scr_allow_sten "1"

set scr_allow_mp40 "1"

set scr_allow_thompson "1"

set scr_allow_pps42 "1"

set scr_allow_greasegun "1"

// Shotgun

set scr_allow_shotgun "1"

// Grenades

set scr_allow_smokegrenades "1"

set scr_allow_fraggrenades "1"

map_rotate

Link to comment
Share on other sites

浩方队员最近所关注的服务器关枪问题~~, 控制台命令~~

要靠控制台命令~~~

按1前面的~,调出控制台、

拿mp40打比方

如果关闭mp40的话

输入

/set scr_allow_mp40 0

就可以关上了

打开的话输入

/set scr_allow_mp40 1

1就是开

0就是关

一定要在服务器启动之后输入

就是可以射击了

再输入

还有就是一定要均衡

~!!!!!

还有一个很重要的事情要说~~

一定要把PK3错误检查关上~!!!

必须关上~~要不会有很多人不能加入你的服务器~!!!

911pm奉上

Edited by 珠珠人
Link to comment
Share on other sites

  • 3 weeks later...

繁体1.2和1.05下载升级方法

首先下载 1.0-1.05的繁体补丁

ftp://www.fpschina.com/COD2/Patch/COD2ENTC060411.EXE

安装好后你的COD2就成为1.05繁体版了

接下来下载 繁体中文版 V1.20 升级补丁

ftp://www.fpschina.com/COD2/Patch/COD2TC1.2Upgrade060412.EXE

注意选择一下目录,

比如 f:/call of duty2/ 我安装后在f:/call of duty2里又多了一个call of duty2文件夹。

接下来的事情就是把原来f:/call of duty2里的单机游戏EXE文件和联机游戏EXE文件改个名字,我是改成

CoD2MP 1.05_S 和CoD2SP 1.05_S 这样如果有需要1.0版本的服务器你也能进。

最后,把刚刚在f:/call of duty2文件夹里生成的那个新的call of duty2文件夹中的所有文件拷贝到f:/call of duty2文件夹里,覆盖原来文件就好了,

运行的时候1.0服务器选择CoD2MP 1.05_S

1.2服务器选择 CoD2MP_S

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

访客
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • 创建新的...